Machine Drawing 3 Orthographic Projection In Technical Drawing This video explains the concept of orthographic projection from isometric drawing implementing the 3rd angle orthographic projection. #machinedrawing #orthog. This video explains how to convert the isometric view of a machine part to orthographic projection.clink the link below for additional guide on the concept o.
Orthographic Projection Machine Drawing In Technical Drawing Orthographic projections is a technical drawing in which different views of an object are projected on different reference planes observing perpendicular to respective reference plane. following notations should be followed while naming different views in orthographic projections. same system of notations should be followed incase numbers, like. Figure 3.1.6 shows a 3 view representation of the support bracket from figure 3.1.5. note that on standard drawings the specific views will not be labelled. more than 3 orthographic views are rarely required to fully describe (and dimension) a part. only very complex parts may require more than 3 orthographic views. figure 3.1.5: support. Orthographic projection is a method of representing three–dimensional objects in two dimensions.it is generally used byengineers, designers, architects, and. Orthographic or multiview drawing. imagine that you have an object suspended by transparent threads inside a glass box, as in figure 3. figure 3 the block suspended in a glass box. then draw the object on each of three faces as seen from that direction. unfold the box (figure 4) and you have the three views. we call this an “orthographic.
Comments are closed.