How To Reupholster A Couch With Attached Cushions Steps Tips Step 2. once you’re done peeling off the old fabric, it is now time to prepare the new one. however, you still need the old fabric for this part of the process. rip out all the seams in the old fabric to see the fabric portions used in the original upholstery. after that, use your tape measure to take the measurements. Remove the old fabric. turn the sofa upside down and remove all the visible staples on the underside using the staple puller. rip the seams on the bottom using the seam ripper if no staples are visible. cutting the fabric off the bottom of the couch with the scissors is a much quicker option if you have no reason to keep the fabric intact.
How To Reupholster An Attached Couch Cushion Reupholster Couch D 6. fit the new couch cover. once the pieces have been sewn together, fit the cover over the couch. trim any excess fabric using a pair of scissors. attach the fabric to the underside of the couch using an easy to use upholstery staple gun like yeohome's on amazon. Continue stapling along the same side, spacing the staples approximately 1 to 2 inches apart. pull the fabric tightly as you go to ensure a smooth and wrinkle free surface. move to the opposite side of the cushion and repeat the stapling process, pulling the fabric taut and placing staples at regular intervals. How to reupholster a couch. step 1. measure your couch & purchase fabric. use a measuring tape to measure every fabric surface of your couch, plus several inches on both sides. you will need to measure: the back of the couch. the arms. each side of each cushion. interior surfaces (underneath behind the cushions. 2. cut your fabric. find a large flat area (a large table or the floor) to roll out and cut your fabric. use the old cover as a pattern to cut the fabric. lay the old cover pieces on the new fabric, rearranging the pieces on top of the fabric as necessary to save fabric. on seamed edges cut 1 2" from the old seam.
Comments are closed.