Diy Ikea Platform Bed Made From Kallax Expedit Bookcase These dimensions are what i used for a full sized ikea platform bed diy made from 3 kallax 4 shelf units. measure your exact project before cutting, and read the detailed instructions below for measuring for a different size bed. 2″x4″x8″ (actual 1 1 2″ x 3 1 2″) cut 2 @ 54 3 4″. cut 2 @ 26 1 4″. Faq: where is part 2?unfortunately, there won't be a part 2 sorry! i moved from that house a few months after making that video, but if you would like to se.
Easy Ikea Platform Bed Diy Tutorial Using Kallax Shelves Remodelaholic A versatile platform bed frame with ikea expedit. we made this storage bed from the old ikea expedit. we already had the expedit so repurposing it was better than throwing it out. ikea item used: two expedit 1×5 units (or three kallax 1×4 units) other materials: a piece of plywood two 4x4s and two 2x4s t brackets, screws and nails. This will serve as the center support for the bed. place this piece on the floor in the center of the bed. place (1) 4 cubby kallax in the front of your platform – we put ours to the side but you could center it as well. place the 60″ x 80″ plywood over the kallax shelves. you may want to screw the plywood into your center base support so. Hack instructions for kallax full sized bed: bed frame. 1. build all three ikea kallax shelves and place them in a u shape in the room where you want the bed to be. 2. although using the official measurements of the kallax shelves the distance between the two side shelves was supposed to be approx. 63 cm, i found it was 68 cm. In this video we test an ikea bed hack we designed this ourselves using both the kallax shelves and the malm drawers managing to create our own platform bed .
Comments are closed.