Diagram Of Audi Fsi Engine

Diagram Of Audi Fsi Engine The vw 3.6 fsi engine is a vr6 (narrow v family ea390) gasoline 3.6 liter engine. it was first introduced to audi q7 in 2005 (bhk and bhl engines) and later to other vw vehicles: passat r36 and cc (blv, bws), phaeton (chna and cmva), touareg (cgra and etc.). the 3.6 liter version was build from the 3.2 v6 fsi engine installed in audi models. The 2.0tsi ea888 1 is known by the following codes: cawa, cawb, cbfa, ccta, and cctb. just like the 1.8tsi, the 2.0l engine has a cast iron cylinder block with 88 mm (3.46 in) cylinder spacing and 220 mm height. the displacement growth was achieved by the new forged steel crankshaft with a 92.8 mm (3.65 in) stroke, while the bore size was kept.

Audi 2 0 Fsi Engine Diagram The cylinder head. the 2.0l fsi engine with 4 valve technology has an aluminium cylinder head. the valves are operated by two overhead camshafts mounted on bearings in a ladder frame to ensure torsional stiffness. the outlet camshaft is driven by toothed belts. the inlet camshaft is driven via the outlet camshaft by a simplex chain. In addition, the geometry and tolerances of the connecting rods were reduced on the high revving version of the 4.2l v8 fsi engine. page 12: crankcase ventilation v, adjacent the crankcase breather (no longer through the chain housing). in the audi q7 engine, the crankcase is vented through a single chamber, i.e., via bank 2 only. It was designed on the base of naturally aspirated engine vw 2.0 fsi with direct fuel injection. the main difference between two engines is letter t, which means turbocharged. that is not the only one difference, of course. the engine was reinforced to maintain a higher power. 2.0 tfsi engine has cast iron cylinder block instead of aluminum. The 4.2 litre v8 fsi engine is supplied in the new audi q7, audi a6, audi a8 and in the rs4. note the technical descriptions of this engine refer mainly to the v8 basic engine in the audi q7 and the high revving engine in the audi rs4. 377 003 introduction the following main objectives were set for the development of the q7 engine:.