A Series Oil Cooler And Filter Head Upgrades

A Series Oil Cooler And Filter Head Upgrades Youtube We explain the range of med oil cooling upgrades for the a series engine. med engineering.co.uk. This is a baldwin bt5581 mpg filter mounted to a baldwin ob8722 filter head. the baldwin bt5581 mpg was a my choice of filter because it filters down to 3micron nominal, 10micron absolute, and will flow up to 35gpm at very low pressures, so it met and exceeded everything that the stock filter has for specs.

Aa Ignition Products While the 6.0’s oil cooler is effective, it also has a history of pattern failures. these problems can be addressed by installing a 6.0 oil cooler relocation kit or a complete 6.0 power stroke oil cooler upgrade. common problems with the stock power stroke oil cooler the 6.0l power stroke uses an oil to water cooler. oil and coolant pass. Remote oil cooler ~$1900 bypass oil filter ~$380 power steering cooler relocation ~$315 (late '06's and '07 trucks) parts $2595 labor is about 8 hrs for this job (at $85 hr) ~680 these figures are an initial snapshot for ya. there are still fluids and odd parts that go into this. Make sure your truck has the correct oil filter cap to work with the factory filter. running the lines and attaching the thermostat block is all that’s left to do under the hood. the finished install is very stealthy, with the exception of the visible cooler lines. source: bullet proof diesel. 888 967 6653. One of the tools for removing plastic push clips"christmastrees" is great to have. get the hood latch out of the way now, or suffer later. make some small alignment marks. first loosen the oil filter and let it drain while you get the radiator draining, you really only need to drain about 3 gal.