2011 2019 Chevrolet Cruze Filling Bleeding Cooling System Youtube In this video i show how to fill and bleed the cooling system on a 2014 chevrolet cruze 1.4 liter turbo engine however procedure is the same for all engines. Fill procedure: 1 close the radiator drain plug. 2 lower the vehicle. 3 vehicle should be level. 4 loosen the vent screw on the radiator. (vent screw is located at the top, right (passenger) side of the radiator) note: close vent screw when coolant begins to flow from the vent screw.
How To Bleed Your Coolant System Chevy Cruze Sonic Trax And Encore #automotive #mechanic #chevycruze #automotivedaily #coolanthope this helps out somebody! subscribe for more content like this one and to stay up to date on a. How to bleed your coolant system step by step chevy cruze sonic trax encore. 9 turn the engine off and allow the engine to cool down. 10 remove the surge tank cap. 11 check the coolant level and fill to the cold mark if necessary. 12 inspect the concentration of the engine coolant, using ge 26568 tester. 13 rinse away any excess coolant from the engine and engine compartment. Btw, when bleeding system, level car, open radiator air bleed screw (passenger side of radiator facing engine toward top) while filling reservoir and close it when coolant starts coming out. then start engine and keep coolant 1 inch above lower reservoir hose top (cold engine level mark) until steady level, put res cap on and bring engine up to.
Dealer Procedure How To Bleed Air Out Of The Cooling System On Chevy 9 turn the engine off and allow the engine to cool down. 10 remove the surge tank cap. 11 check the coolant level and fill to the cold mark if necessary. 12 inspect the concentration of the engine coolant, using ge 26568 tester. 13 rinse away any excess coolant from the engine and engine compartment. Btw, when bleeding system, level car, open radiator air bleed screw (passenger side of radiator facing engine toward top) while filling reservoir and close it when coolant starts coming out. then start engine and keep coolant 1 inch above lower reservoir hose top (cold engine level mark) until steady level, put res cap on and bring engine up to. Close up the drain plug at this point and fill the container to the cool or cold line marked by the dipstick, then put the upper cap back on. to bleed the cooling system on the chevy cruze, loosen the bleeder valve located on the backside of the radiator. the questions and answers on this page are the statements and opinions of their respective. How to bleed cooling system on chevrolet cruze sonic 1.8 1.4 car overheatsin this video we will show you how to bleed the cooling system on chevrolet cruze.
Comments are closed.